Audio-Technica AT4041SP AT4041 Pair w/Wooden Case Sale

Audio-Technica AT4041SP AT4041 Pair w/Wooden Case

The AT4041SP Studio Pack offers two AT4041 studio condenser microphones. Engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound, the AT4041 features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion. 

Features:

• Smooth, extended frequency response with a slight rise occurring in the high-frequency region
• Ideal for drum overheads, acoustic guitar, piano, horns and under snare
• Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
• Switchable hi-pass filter and rugged turned-brass microphone housing 

AT4041 Specs:

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 20 Hz – 20 kHz
• Low Frequency Roll Off: 80 Hz, 12 dB/octave
• Open Circuitry Sensitivity: -36 dB (15.8 mV), re 1V at 1 Pa
• Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range: 121 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 70 dB, 1 Hz at 1 Pa
• Phantom Power Requirements: 48V DC, 3.2 mA typical 
• Switches: Flat, roll-off
• Weight: 4.2 oz (120 g)
• Dimensions: 6.28″ (159.5 mm) long, 0.83″ (21.0 mm) body diameter
• Output Connector: Integral 3-pin XLRM-type
• Accessories Included: 2x AT8405a stand clamp for 5/8″-27 threaded stands; 2x AT8159 windscreen; protective wooden storage case